Home   |   Services  |   About Us |   Contact   

     

MENU

 

 



ONLINE CATALOG

SHOP PROJECTS



FAQ

ORDERING SPECIFICS


 
 
 
 



Michigan T stand clothing rack

 




This is the assembly instructions for the Michigan T stand clothing rack.


To assemble this rack start by opening all the packages and lay all the pieces out. Make sure you have everything before you start.


For a standard 54" height you should have:


2-24" pipes


2-12" pipes


2 caps


1-T


1- pipe connector


4-felt or nickel gliders


4-#12X1&3/4" screws


__________________________________________________


For a dress 67" height you should have:


2-24" pipes


1-18" pipe


2-12" pipes


2 caps


1-T


2- pipe connectors


4-felt or nickel gliders


4-#12X1&3/4" screws


__________________________________________________


Step 1


Start by installing the gliders in the bottom of the base. They screw into the plastic holes in each corner. Screw them all the way in and adjust them later to level the rack. Next flip the base over and install the base flange (round plate). Use the 4 screws provided. Screw them in by hand or very carefully with a drill. Next install a 24" pipe into the base flange. Next install a pipe connector. Next install another 24" pipe. If you have the standard 54" rack skip to step 3


__________________________________________________


Step 2


This step is exclusively for 67" dress height racks. On top of the top 24" pipe install another pipe connector. Next install an 18" pipe. Go to step 3


__________________________________________________


Step 3


Next install the T on the top with the pipe going into the middle hole of the T. Next install the 12" pipes into each side of the T. Install the caps on the ends of the 12" pipes. You are done.











If you have any questions please email me at..

vsawmike@gmail.com


Thanks, Michael White


 
 
 









Free Website Counter






 Copyright Design by: Michael White/Michael Howard